DESCRIPTION: Poz-Patch 3 is a polymer modified pozzolanic formula that requires only the addition of clean water to produce a fast-setting, skim coating patch.Poz-Patch 3 is ideal as a skim coat and for filling substrate imperfections, cracks and seams. It can also be sloped to accommodate transition areas.
LIMITATIONS: Poz-Patch 3 is not self-leveling.
SURFACE PREPARATION: Substrates must be sound, solid, clean and free from dust, oil, grease, paint, wax sealers or any deleterious substances that may prevent bonding. Poz-Patch 3 can be installed over old adhesive residues that are thin and well bonded. Adhesive residue must not be affected by water or the adhesive used for the next floor covering. If both adhesives are suitable, wet-scrape the old adhesive to a thin, well-bonded residue, using the recommendations of the Resilient Floor Covering Institute. Apply Poz-Patch 3 at temperatures between 50°F and 95°F. Do not use over unstable material such as gypsum or particle board.Poz-Patch 3 does not require priming prior to installation.
MIXING & APPLICATION: Place a small amount ofPoz-Patch 3 in a clean mixing container. While mixing, add water until a trowelable, lump-free consistency is achieved. Recommended mixing ratio is 3 1/2 parts powder to 1 part water by volume. DO NOT OVER-WATER! Mix only the amount that can be used in 20 minutes. Do not retemper. Never mix with cements or other additives. Pour and trowel the patch using a steel trowel. Apply sufficient pressure to fill all defects of the subfloor. Poz-Patch 3 may be applied from featheredge to 1/8”.
PDFs Available for Download
• Product Information Sheet
• MSDS |
