DESCRIPTION: FCP-102 Floor Sealer is the best way to prepare for long lasting protection against harsh cleaners, hard wear, abrasion and strippers.

LIMITATIONS: FCP-102 is not for finished coats. It is only to be used as a base coat sealer. FCP-102 must be coated withFCP-300. Do not leave FCP-102 exposed to traffic.

MIXING & APPLICATION: No mixing required. The floor surface must be completely dry and clean before FCP-102 can be applied. Use a rayon string mop, professional bar applicator or machine. With smooth, even strokes, spread 2 coats of FCP-102 over the entire floor surface. Make sure to cover the ends of the floor all the way to the wall. Apply the first coat of FCP-102 in a vertical (north/south) direction. Allow the first coat to dry completely. Drying time for the first coat should take about 45 minutes to 1 1/2 hours. Apply the second coat following the above directions, but in a horizontal (east/west) direction, perpendicular to the first coat. This direction change allows FCP-102 to properly deposit at the tile junctures. Allow the floor to completely dry before traffic or additional top coats can be applied. Water resistance is achieved if, 24 hours after application, polish does not show any adverse effects, such as whitening, spotting or streaking when water is applied to the film for one hour.

PDFs Available for Download

• Product Information Sheet
• MSDS